Try 2.2 m span × 1.3 multiplier = 2.86 m. Apply the additional 10% permitted in Note 1: 2.86 + 10% (0.286) = 3.146. This is more than the span in Figure 1, so a 2.2 m rafter span is suitable. Back to top. Step 5 - Rafter size. Read the rafter size in the left column of Table 10.1 for the 2.2 m span chosen. This indicates a 140 × 45 mm Standard One-Car Garage. The accepted and standard size for a single-car garage is 240 square feet, 12 feet in length and width. You may find a 9 feet long door size which means that a couple of feet on either side will allow easy movement. Mostly, all cars can fit into a single-car garage, but trucks, long SUVs, and vans usually won't enter The average carport dimensions for a single carport in Australia are 3 metres (width) x 6 metres (length). Double carport. The average carport dimensions for double carports in Australia are 6 metres (width) x 6 metres (length). Triple carport. The average carport dimensions for triple carports in Australia are 9 metres (width) x 6 metres (length). What is the minimum width and length of a double carport? According to Australian Standards*, the minimum width for a double carport is 4.8m and the minimum length is 5.4m. An additional 0.3m is required on each enclosed side. This will accommodate a minimum door width of 4.8m. *AS 2890.1 Section 5.4. ⇒ Carport sizes. 1 Vehicle (3m x 6m) 2 Vehicles (6m x 6m) 3 Vehicles (7.5m x 6m) 4 Vehicles (10m x 6m) Or any size carport required; 2200mm high panels are standard and are 100% secured by a locking flange holding all vertical and horizontal wire rods in place WDMnv8G.

standard carport size in meters